maths.free › Geometry › Solid geometry: prisms, pyramids, spheres

Solid geometry: prisms, pyramids, spheres

Volumes, surface areas and cross-sections in three dimensions.

Prisms and cylinders are base × height; pyramids and cones a third of that; spheres 4/3 πr³. Picture it: a cone fits three times into the cylinder around it. Rotate the 3D view to see the base and slant. Think it: Cavalieri's principle (equal cross-sections at every height means equal volume) is the idea calculus later makes exact.

Rechenbeispiel · volume of a cone with radius 3 height 4

Geometry · Solids

Volume of a cone with radius 3 height 4

Schritt für Schritt

  1. r = 3,\ h = 4,\ \ell = \sqrt{r^2+h^2} = 5

    Cone\; ℓ is the slant height.

  2. V = \tfrac{1}{3}\pi r^2 h = 12 \pi \approx 37.699

    Volume: a third of the cylinder around it.

  3. S = \pi r^2 + \pi r \ell = 24 \pi \approx 75.398

    Surface area = base + lateral.

Antwort aufdecken
V = 12 \pi \approx 37.699,\quad S = 24 \pi

Jetzt du Wählen Sie ein Problem, oder tippen oder zeichnen Sie Ihre eigenen. Jeder Schritt, ein Bild, die Antwort versteckt, bis Sie fragen.

Behalten Sie Ihre eigenen Lösungswege

Ein kostenloses Konto fügt Notizen zu jeder Lektion, eine Aufzeichnung von dem, was Sie beendet haben, Ihre gelösten Probleme an einem Ort, und ein Tutor können Sie über diese Seite fragen. Die Mathematik selbst ist offen für alle, angemeldet oder nicht.

Registrieren Anmelden

Hier verwendete Symbole

Tippen Sie auf jedes Symbol für die vollständige Definition, ein Bild und was jeder Buchstabe darin bedeutet.

Wie man: Solid geometry: prisms, pyramids, spheres

  1. Cone\; ℓ is the slant height.
  2. Volume: a third of the cylinder around it.
  3. Surface area = base + lateral.

Fragen, die die Leute stellen

Why does every triangle have angles adding to 180°?

Draw a line through one vertex parallel to the opposite side: the two alternate angles equal the other two angles of the triangle, and the three angles at the vertex lie on a straight line. That is Euclid's proof, and it is why the fact holds only on a flat plane.

When do I use the law of sines versus the law of cosines?

Cosines when you know three sides, or two sides and the angle between them. Sines when you know an angle and the side opposite it, plus one more piece.

What is the difference between area and perimeter?

Perimeter is the length of the boundary (one dimension, measured in metres); area is the amount of surface inside (two dimensions, square metres). Doubling every side doubles the perimeter but quadruples the area.

Mehr in Geometry

TrianglesPythagorean theoremCirclesPolygonsSolidsCoordinate geometryEuclid's axioms and the structure of proofCongruent and similar trianglesCircle theoremsTransformations: translation, rotation, reflection, dilation