maths.free › Differential Equations › Separable equations

Separable equations

dy/dx = f(x)g(y): separate, integrate both sides, solve for y.

If the rate of change factors into a piece in x times a piece in y, you can move all the y's to one side with dy and integrate both sides. y′ = 2y gives y = Ce^{2x}, exponential growth, the shape of populations, compound interest and radioactive decay (with a negative constant). The plot shows the family of solutions for several C.

Separation of Variables

We start with a definition and some examples.

The term ‘separable’ refers to the fact that the right-hand side of the equation can be separated into a function of \(x\) times a function of \(y.\) Examples of separable differential equations include

\[\begin{array}{l} \\ \\ y'=({x}^{2}-4)(3y+2) \\ y'=6{x}^{2}+4x \\ y'=\text{sec}\ y+\text{tan}\ y \\ y'=xy+3x-2y-6.\end{array}\]

The second equation is separable with \(f(x)=6{x}^{2}+4x\) and \(g(y)=1,\) the third equation is separable with \(f(x)=1\) and \(g(y)=\text{sec}\ y+\text{tan}\ y,\) and the right-hand side of the fourth equation can be factored as \((x-2)(y+3),\) so it is separable as well. The third equation is also called an autonomous differential equation because the right-hand side of the equation is a function of \(y\) alone. If a differential equation is separable, then it is possible to solve the equation using the method of separation of variables.

Condensed: the full section is in OpenStax Calculus Volume 2.

Applications of Separation of Variables

Many interesting problems can be described by separable equations. We illustrate two types of problems: solution concentrations and Newton’s law of cooling.

Condensed: the full section is in OpenStax Calculus Volume 2.

Key Concepts

  • A separable differential equation is any equation that can be written in the form \(y'=f(x)g(y).\)
  • The method of separation of variables is used to find the general solution to a separable differential equation.

Key Equations

Separable differential equation\({y}^{'}=f(x)g(y)\)
Solution concentration\(\frac{du}{dt}=\text{INFLOW RATE}-\text{OUTFLOW RATE}\)
Newton’s law of cooling\(\frac{dT}{dt}=k(T-{T}_{s})\)

Separable Equations

Solve the following initial-value problems with the initial condition \({y}_{0}=0\) and graph the solution.

Find the general solution to the differential equation.

Find the solution to the initial-value problem.

For the following problems, use a software program or your calculator to generate the directional fields. Solve explicitly and draw solution curves for several initial conditions. Are there some critical initial conditions that change the behavior of the solution?

For the following problems, use Newton’s law of cooling.

For Exercises 159-162, assume a cooling constant of \(k=-0.125\) and assume time \(t\) is in minutes.

उदाहरण · y' = 2y

Y' = 2y

\frac{d}{d x} y{\left(x \right)} = 2 y{\left(x \right)}

चरणद्वारा चरण

  1. \frac{d}{d x} y{\left(x \right)} = 2 y{\left(x \right)}

    The differential equation.

  2. \text{order } 1

    Order 1: the highest derivative present.

  3. \text{Separable}

    Move everything in y to one side with dy and everything in x to the other, then integrate both sides.

  4. r - 2 = 0

    Characteristic equation of the homogeneous part (substitute y = e^{rx}).

  5. r = 2

    Its roots.

  6. y{\left(x \right)} = C_{1} e^{2 x}

    General solution (C₁, C₂ … are arbitrary constants).

  7. \checkmark

    Verified: substituting the solution back into the equation gives 0.

जवाफ प्रकट गर्नुहोस्
y{\left(x \right)} = C_{1} e^{2 x}

अब तपाईँ समस्या रोज्नुहोस्, वा टाइप गर्नुहोस् वा तपाईँको आफ्नै रेखाचित्र गर्नुहोस् । प्रत्येक चरण, एउटा तस्वीर, तपाईँले सोध्नु अघि उत्तर लुकेको छ ।

अभ्यास (40)

कागजमा पहिला प्रत्येक प्रयास गर्नुहोस् । जाँच गर्न जवाफ प्रकट गर्नुहोस्; रुजु गरिएकाहरू प्रत्येक चरणका लागि समाधानकर्तामा खोल्न सकिन्छ ।

  1. Find a general solution to the differential equation \(y'=({x}^{2}-4)(3y+2)\) using the method of separation of variables.

    जवाफ प्रकट गर्नुहोस्

    Follow the five-step method of separation of variables.

    1. In this example, \(f(x)={x}^{2}-4\) and \(g(y)=3y+2.\) Setting \(g(y)=0\) gives \(y=-\frac{2}{3}\) as a constant solution.
    2. Rewrite the differential equation in the form
      \[\frac{dy}{3y+2}=({x}^{2}-4)dx.\]
    3. Integrate both sides of the equation:
      \[\int \frac{dy}{3y+2}=\int ({x}^{2}-4)\ dx.\]
      Let \(u=3y+2.\) Then \(du=3\frac{dy}{dx}dx,\) so the equation becomes
      \[\begin{array}{lll}\frac{1}{3}\int \frac{1}{u}du & = & \frac{1}{3}{x}^{3}-4x+C \\ \frac{1}{3}\ \text{ln}|u| & = & \frac{1}{3}{x}^{3}-4x+C \\ \frac{1}{3}\ \text{ln}|3y+2| & = & \frac{1}{3}{x}^{3}-4x+C.\end{array}\]
    4. To solve this equation for \(y,\) first multiply both sides of the equation by \(3.\)
      \[\text{ln}|3y+2|={x}^{3}-12x+3C\]
      Now we use some logic in dealing with the constant \(C.\) Since \(C\) represents an arbitrary constant, \(3C\) also represents an arbitrary constant. If we call the second arbitrary constant \({C}_{1},\) the equation becomes
      \[\text{ln}|3y+2|={x}^{3}-12x+{C}_{1}.\]
      Now exponentiate both sides of the equation (i.e., make each side of the equation the exponent for the base \(e).\)
      \[\begin{array}{lll}{e}^{\text{ln}|3y+2|} & = & {e}^{{x}^{3}-12x+{C}_{1}} \\ |3y+2| & = & {e}^{{C}_{1}}{e}^{{x}^{3}-12x}\end{array}\]
      Again define a new constant \({C}_{2}={e}^{{c}_{1}}\) (note that \({C}_{2}>0)\text{:}\)
      \[|3y+2|={C}_{2}{e}^{{x}^{3}-12x}.\]
      This corresponds to two separate equations: \(3y+2={C}_{2}{e}^{{x}^{3}-12x}\) and \(3y+2=\text{-}{C}_{2}{e}^{{x}^{3}-12x}.\)
      The solution to either equation can be written in the form \(y=\frac{-2\pm {C}_{2}{e}^{{x}^{3}-12x}}{3}.\)
      Since \({C}_{2}>0,\) it does not matter whether we use plus or minus, so the constant can actually have either sign. Furthermore, the subscript on the constant \(C\) is entirely arbitrary, and can be dropped. Therefore the solution can be written as
      \[y=\frac{-2+C{e}^{{x}^{3}-12x}}{3}.\]
    5. No initial condition is imposed, so we are finished.
  2. Use the method of separation of variables to find a general solution to the differential equation \(y'=2xy+3y-4x-6.\)

    जवाफ प्रकट गर्नुहोस्

    \(y=2+C{e}^{{x}^{2}+3x}\)

  3. Using the method of separation of variables, solve the initial-value problem

    \[y'=(2x+3)({y}^{2}-4),\ y(0)=-1.\]
    जवाफ प्रकट गर्नुहोस्

    Follow the five-step method of separation of variables.

    1. In this example, \(f(x)=2x+3\) and \(g(y)={y}^{2}-4.\) Setting \(g(y)=0\) gives \(y=\pm 2\) as constant solutions.
    2. Divide both sides of the equation by \({y}^{2}-4\) and multiply by \(dx.\) This gives the equation
      \[\frac{dy}{{y}^{2}-4}=(2x+3)\ dx.\]
    3. Next integrate both sides:
      \[\int \frac{1}{{y}^{2}-4}\ dy=\int (2x+3)\ dx.\]
      To evaluate the left-hand side, use the method of partial fraction decomposition. This leads to the identity
      \[\frac{1}{{y}^{2}-4}=\frac{1}{4}(\frac{1}{y-2}-\frac{1}{y+2}).\]
      Then becomes
      \[\begin{array}{lll}\frac{1}{4}\int (\frac{1}{y-2}-\frac{1}{y+2})\ dy & = & \int (2x+3)\ dx \\ \frac{1}{4}(\text{ln}|y-2|-\text{ln}|y+2|) & = & {x}^{2}+3x+C.\end{array}\]
      Multiplying both sides of this equation by \(4\) and replacing \(4C\) with \({C}_{1}\) gives
      \[\begin{array}{lll}\text{ln}|y-2|-\text{ln}|y+2| & = & 4{x}^{2}+12x+{C}_{1} \\ \text{ln}|\frac{y-2}{y+2}| & = & 4{x}^{2}+12x+{C}_{1}.\end{array}\]
    4. It is possible to solve this equation for y. First exponentiate both sides of the equation and define \({C}_{2}={e}^{{C}_{1}}\text{:}\)
      \[|\frac{y-2}{y+2}|={C}_{2}{e}^{4{x}^{2}+12x}.\]
      Next we can remove the absolute value and let \({C}_{2}\) be either positive or negative. Then multiply both sides by \(y+2.\)
      \[\begin{array}{l} \\ \\ y-2={C}_{2}(y+2){e}^{4{x}^{2}+12x} \\ y-2={C}_{2}y{e}^{{}^{4{x}^{2}+12x}}+2{C}_{2}{e}^{{}^{4{x}^{2}+12x}}.\end{array}\]
      Now collect all terms involving y on one side of the equation, and solve for \(y\text{:}\)
      \[\begin{array}{lll}y-{C}_{2}y{e}^{4{x}^{2}+12x} & = & 2+2{C}_{2}{e}^{4{x}^{2}+12x} \\ y(1-{C}_{2}{e}^{4{x}^{2}+12x}) & = & 2+2{C}_{2}{e}^{4{x}^{2}+12x} \\ y & = & \frac{2+2{C}_{2}{e}^{4{x}^{2}+12x}}{1-{C}_{2}{e}^{4{x}^{2}+12x}}.\end{array}\]
    5. To determine the value of \({C}_{2},\) substitute \(x=0\) and \(y=-1\) into the general solution. Alternatively, we can put the same values into an earlier equation, namely the equation \(\frac{y-2}{y+2}={C}_{2}{e}^{4{x}^{2}+12}.\) This is much easier to solve for \({C}_{2}\text{:}\)
      \[\begin{array}{lll}\frac{y-2}{y+2} & = & {C}_{2}{e}^{4{x}^{2}+12x} \\ \frac{-1-2}{-1+2} & = & {C}_{2}{e}^{4{(0)}^{2}+12(0)} \\ {C}_{2} & = & -3.\end{array}\]
      Therefore the solution to the initial-value problem is
      \[y=\frac{2-6{e}^{4{x}^{2}+12x}}{1+3{e}^{4{x}^{2}+12x}}.\]
      A graph of this solution appears in .
  4. Find the solution to the initial-value problem

    \[6y'=(2x+1)({y}^{2}-2y-8),\ y(0)=-3\]

    using the method of separation of variables.

    जवाफ प्रकट गर्नुहोस्

    \(y=\frac{4+14{e}^{{x}^{2}+x}}{1-7{e}^{{x}^{2}+x}}\)

  5. A tank containing \(100\ \text{L}\) of a brine solution initially has \(4\ \text{kg}\) of salt dissolved in the solution. At time \(t=0,\) another brine solution flows into the tank at a rate of \(2\ \text{L/min}\text{.}\) This brine solution contains a concentration of \(0.5\ \text{kg/L}\) of salt. At the same time, a stopcock is opened at the bottom of the tank, allowing the combined solution to flow out at a rate of \(2\ \text{L/min},\) so that the level of liquid in the tank remains constant (). Find the amount of salt in the tank as a function of time (measured in minutes), and find the limiting amount of salt in the tank, assuming that the solution in the tank is well mixed at all times.

    जवाफ प्रकट गर्नुहोस्

    First we define a function \(u(t)\) that represents the amount of salt in kilograms in the tank as a function of time. Then \(\frac{du}{dt}\) represents the rate at which the amount of salt in the tank changes as a function of time. Also, \(u(0)\) represents the amount of salt in the tank at time \(t=0,\) which is \(4\) kilograms.

    The general setup for the differential equation we will solve is of the form

    \[\frac{du}{dt}=\text{INFLOW RATE}-\text{OUTFLOW RATE}.\]

    INFLOW RATE represents the rate at which salt enters the tank, and OUTFLOW RATE represents the rate at which salt leaves the tank. Because solution enters the tank at a rate of \(2\) L/min, and each liter of solution contains \(0.5\) kilogram of salt, every minute \(2(0.5)=1\ \text{kilogram}\) of salt enters the tank. Therefore INFLOW RATE = \(1.\)

    To calculate the rate at which salt leaves the tank, we need the concentration of salt in the tank at any point in time. Since the actual amount of salt varies over time, so does the concentration of salt. However, the volume of the solution remains fixed at 100 liters. The number of kilograms of salt in the tank at time \(t\) is equal to \(u(t).\) Thus, the concentration of salt is \(\frac{u(t)}{100}\) kg/L, and the solution leaves the tank at a rate of \(2\) L/min. Therefore salt leaves the tank at a rate of \(\frac{u(t)}{100}\cdot 2=\frac{u(t)}{50}\) kg/min, and OUTFLOW RATE is equal to \(\frac{u(t)}{50}.\) Therefore the differential equation becomes \(\frac{du}{dt}=1-\frac{u}{50},\) and the initial condition is \(u(0)=4.\) The initial-value problem to be solved is

    \[\frac{du}{dt}=1-\frac{u}{50},\ u(0)=4.\]

    The differential equation is a separable equation, so we can apply the five-step strategy for solution.

    Step 1. Setting \(1-\frac{u}{50}=0\) gives \(u=50\) as a constant solution. Since the initial amount of salt in the tank is \(4\) kilograms, this solution does not apply.

    Step 2. Rewrite the equation as

    \[\frac{du}{dt}=\frac{50-u}{50}.\]

    Then multiply both sides by \(dt\) and divide both sides by \(50-u\text{:}\)

    \[\frac{du}{50-u}=\frac{dt}{50}.\]

    Step 3. Integrate both sides:

    \[\begin{array}{lll}\int \frac{du}{50-u} & = & \int \frac{dt}{50} \\ -\text{ln}|50-u| & = & \frac{t}{50}+C.\end{array}\]

    Step 4. Solve for \(u(t)\text{:}\)

    \[\begin{array}{lll}\text{ln}|50-u| & = & -\frac{t}{50}-C \\ {e}^{\text{ln}|50-u|} & = & {e}^{\text{-}(t\text{/}50)-C} \\ |50-u| & = & {C}_{1}{e}^{\text{-}t\text{/}50}.\end{array}\]

    Eliminate the absolute value by allowing the constant to be either positive or negative:

    \[50-u={C}_{1}{e}^{\text{-}t\text{/}50}.\]

    Finally, solve for \(u(t)\text{:}\)

    \[u(t)=50-{C}_{1}{e}^{\text{-}t\text{/}50}.\]

    Step 5. Solve for \({C}_{1}\text{:}\)

    \[\begin{array}{lll}u(0) & = & 50-{C}_{1}{e}^{-0\text{/}50} \\ 4 & = & 50-{C}_{1} \\ {C}_{1} & = & 46.\end{array}\]

    The solution to the initial value problem is \(u(t)=50-46{e}^{\text{-}t\text{/}50}.\) To find the limiting amount of salt in the tank, take the limit as \(t\) approaches infinity:

    \[\begin{array}{ll}\underset{t\to \infty }{\text{lim}}u(t) & =50-46{e}^{\text{-}t\text{/}50} \\ & =50-46(0) \\ & =50.\end{array}\]

    Note that this was the constant solution to the differential equation. If the initial amount of salt in the tank is \(50\) kilograms, then it remains constant. If it starts at less than 50 kilograms, then it approaches 50 kilograms over time.

  6. A tank contains \(3\) kilograms of salt dissolved in \(75\) liters of water. A salt solution of \(0.4\ \text{kg salt/L}\) is pumped into the tank at a rate of \(6\ \text{L/min}\) and is drained at the same rate. Solve for the salt concentration at time \(t.\) Assume the tank is well mixed at all times.

    जवाफ प्रकट गर्नुहोस्

    Initial value problem:

    \(\frac{du}{dt}=2.4-\frac{2u}{25},\ u(0)=3\)

    \(\text{Solution:}\ u(t)=30-27{e}^{\text{-}2t\text{/}25}\)
    \(\text{Concentration: }30-27{e}^{\frac{-2t}{25}}\)

  7. A pizza is removed from the oven after baking thoroughly, and the temperature of the pizza when it comes out of the oven is \(200^{\circ}\text{F}\text{.}\) The temperature of the kitchen is \(75^{\circ}\text{F},\) and after \(1\) minute the temperature of the pizza is \(190^{\circ}\text{F}\text{.}\) We would like to wait until the temperature of the pizza reaches \(150^{\circ}\text{F}\) before cutting and serving it (). How much longer will we have to wait?

    जवाफ प्रकट गर्नुहोस्

    The ambient temperature (surrounding temperature) is \(75^{\circ}\text{F},\) so \({T}_{s}=75.\) The temperature of the pizza when it comes out of the oven is \(200^{\circ}\text{F},\) which is the initial temperature (i.e., initial value), so \({T}_{0}=200.\) Therefore becomes

    \[\frac{dT}{dt}=k(T-75),\ T(0)=200.\]

    To solve the differential equation, we use the five-step technique for solving separable equations.

    1. Setting the right-hand side equal to zero gives \(T=75\) as a constant solution. Since the pizza starts at \(200^{\circ}\text{F},\) this is not the solution we are seeking.
    2. Rewrite the differential equation by multiplying both sides by \(dt\) and dividing both sides by \(T-75\text{:}\)
      \[\frac{dT}{T-75}=kdt.\]
    3. Integrate both sides:
      \[\begin{array}{lll}\int \frac{dT}{T-75} & = & \int kdt \\ \text{ln}|T-75| & = & kt+C.\end{array}\]
    4. Solve for \(T\) by first exponentiating both sides:
      \[\begin{array}{lll}{e}^{\text{ln}|T-75|} & = & {e}^{kt+C} \\ |T-75| & = & {C}_{1}{e}^{kt} \\ T-75 & = & {C}_{1}{e}^{kt} \\ T(t) & = & 75+{C}_{1}{e}^{kt}.\end{array}\]
    5. Solve for \({C}_{1}\) by using the initial condition \(T(0)=200\text{:}\)
      \[\begin{array}{lll}T(t) & = & 75+{C}_{1}{e}^{kt} \\ T(0) & = & 75+{C}_{1}{e}^{k(0)} \\ 200 & = & 75+{C}_{1} \\ {C}_{1} & = & 125.\end{array}\]
      Therefore the solution to the initial-value problem is
      \[T(t)=75+125{e}^{kt}.\]
      To determine the value of \(k,\) we need to use the fact that after \(1\) minute the temperature of the pizza is \(190^{\circ}\text{F}\text{.}\) Therefore \(T(1)=190.\) Substituting this information into the solution to the initial-value problem, we have
      \[\begin{array}{lll}T(t) & = & 75+125{e}^{kt} \\ T(1) & = & 190=75+125{e}^{k} \\ 115 & = & 125{e}^{k} \\ \frac{115}{125} & = & \frac{23}{25}={e}^{k} \\ \text{ln}\ {e}^{k} & = & \text{ln}\ (\frac{23}{25}) \\ k & = & \ \text{ln}\ (\frac{23}{25})\approx -.08338\end{array}\]
      So now we have \(T(t)=75+125{e}^{-.08338t}.\) When is the temperature \(150^{\circ}\text{F?}\) Solving for \(t,\) we find
      \[\begin{array}{lll}T(t) & = & 75+125{e}^{-.08338t} \\ 150 & = & 75+125{e}^{-.08338t} \\ 75 & = & 125{e}^{-.08338t} \\ \frac{75}{125} & = & \frac{3}{5}={e}^{-.08338t} \\ -.08338t & = & \text{ln}\ \frac{3}{5} \\ t & = & \frac{\text{ln}\left(\frac{3}{5}\right)}{-.08338}\approx 6.12.\end{array}\]
      Therefore we need to wait an additional \(6.12\) minutes (after the temperature of the pizza reached \(200^{\circ}\text{F}).\) That should be just enough time to finish this calculation.
  8. A cake is removed from the oven after baking thoroughly, and the temperature of the cake when it comes out of the oven is \(450^{\circ}\text{F}\text{.}\) The temperature of the kitchen is \(70^{\circ}\text{F},\) and after \(10\) minutes the temperature of the cake is \(330^{\circ}\text{F}\text{.}\)

    1. Write the appropriate initial-value problem to describe this situation.
    2. Solve the initial-value problem for \(T(t).\)
    3. How long will it take until the temperature of the cake is within \(5^{\circ}\text{F}\) of room temperature?
    जवाफ प्रकट गर्नुहोस्
    1. Initial value problem
      \(\frac{dT}{dt}=k(T-70),\ T(0)=450\)
    2. \(T(t)=70+380{e}^{kt}\)
    3. Approximately \(114\) minutes.
  9. \(\frac{dy}{dt}=y+1\)

    जवाफ प्रकट गर्नुहोस्

    \(y={e}^{t}-1\)

  10. \(\frac{dy}{dt}=y-1\)

  11. \(\frac{dy}{dt}=-y+1\)

    जवाफ प्रकट गर्नुहोस्

    \(y=1+C{e}^{\text{-}t}\)

  12. \(\frac{dy}{dt}=\text{-}y-1\)

  13. \({x}^{2}y'=(x+1)y\)

    जवाफ प्रकट गर्नुहोस्

    \(y=Cx{e}^{-1\text{/}x}\)

  14. \(y'=\text{tan}(y)x\)

  15. \(y'=2x{y}^{2}\)

    जवाफ प्रकट गर्नुहोस्

    \(y=\frac{1}{C-{x}^{2}}\)

  16. \(\frac{dy}{dt}=y\ \text{cos}(3t+2)\)

  17. \(2x\frac{dy}{dx}={y}^{2}\)

    जवाफ प्रकट गर्नुहोस्

    \(y=-\frac{2}{C+\text{ln}\ x}\)

  18. \(y'={e}^{y}{x}^{2}\)

  19. \((1+x)y'=(x+2)(y-1)\)

    जवाफ प्रकट गर्नुहोस्

    \(y=C{e}^{x}(x+1)+1\)

  20. \(\frac{dx}{dt}=3{t}^{2}({x}^{2}+4)\)

  21. \(t\frac{dy}{dt}=\sqrt{1-{y}^{2}}\)

    जवाफ प्रकट गर्नुहोस्

    \(y=\text{sin}(\text{ln}\ t+C)\)

  22. \(y'={e}^{x}{e}^{y}\)

  23. \(y'={e}^{y-x},y(0)=0\)

    जवाफ प्रकट गर्नुहोस्

    \(y=\text{-}\text{ln}({e}^{\text{-}x})\)

  24. \(y'={y}^{2}(x+1),y(0)=2\)

  25. \(\frac{dy}{dx}={y}^{3}x{e}^{{x}^{2}},y(0)=1\)

    जवाफ प्रकट गर्नुहोस्

    \(y=\frac{1}{\sqrt{2-{e}^{{x}^{2}}}}\)

  26. \(\frac{dy}{dt}={y}^{2}{e}^{x}\text{sin}(3x),y(0)=1\)

  27. \(y'=\frac{x}{{\text{sech}}^{2}y},y(0)=0\)

    जवाफ प्रकट गर्नुहोस्

    \(y={\text{tanh}}^{-1}(\frac{{x}^{2}}{2})\)

  28. \(y'=2xy(1+2y),y(0)=-1\)

  29. \(\frac{dx}{dt}=\text{ln}(t)\sqrt{1-{x}^{2}},x(1)=0\)

    जवाफ प्रकट गर्नुहोस्

    \(x=\text{sin}(1-t+t\ \text{ln}\ t)\)

  30. \(y'=3{x}^{2}({y}^{2}+4),y(0)=0\)

  31. \(y'={e}^{y}{5}^{x},y(0)=\text{ln}(\text{ln}(5))\)

    जवाफ प्रकट गर्नुहोस्

    \(y=\text{ln}(\text{ln}(5))-\text{ln}(2-{5}^{x})\)

  32. \(y'=-2x\ \text{tan}(y),y(0)=\frac{\pi }{6}\)

  33. [T] \(y'=1-2y\)

    जवाफ प्रकट गर्नुहोस्

    \(y=C{e}^{-2x}+\frac{1}{2}\)

  34. [T] \(y'={y}^{2}{x}^{3}\)

  35. [T] \(y'={y}^{3}{e}^{x}\)

    जवाफ प्रकट गर्नुहोस्

    \(y=\frac{1}{\sqrt{2}\sqrt{C-{e}^{x}}}\)

  36. [T] \(y'={e}^{y}\)

  37. [T] \(y'=y\ \text{ln}(x)\)

    जवाफ प्रकट गर्नुहोस्

    \(y=C{e}^{\text{-}x}{x}^{x}\)

  38. Most drugs in the bloodstream decay according to the equation \(y'=cy,\) where \(y\) is the concentration of the drug in the bloodstream. If the half-life of a drug is \(2\) hours, what fraction of the initial dose remains after \(6\) hours?

  39. A drug is administered intravenously to a patient at a rate \(r\) mg/h and is cleared from the body at a rate proportional to the amount of drug still present in the body, \(d\). Set up and solve the differential equation, assuming there is no drug initially present in the body.

    जवाफ प्रकट गर्नुहोस्

    \(y=\frac{r}{d}(1-{e}^{\text{-}dt})\)

  40. [T] How often should a drug be taken if its dose is \(3\) mg, it is cleared at a rate \(c=0.1\) mg/h, and \(1\) mg is required to be in the bloodstream at all times?

तपाईँको आफ्नै काम गर्ने राख्नुहोस्

एक निःशुल्क खाता प्रत्येक पाठ मा नोट थप्छ, तपाईं के समाप्त गरेको छ को एक रेकर्ड, एक ठाउँमा आफ्नो समाधान समस्या, र एक शिक्षक तपाईं यो पृष्ठ बारेमा सोध्न सक्नुहुन्छ. गणित आफैलाई सबैलाई खुला छ, मा साइन इन वा छैन.

साइन अप गर्नुहोस् लगइन

यहाँ प्रयोग गरिएको प्रतीक

पूर्ण परिभाषा, एउटा तस्वीर, र यो प्रत्येक अक्षर अर्थ के लागि कुनै पनि प्रतीक ट्याप गर्नुहोस्।

कसरी: Separable equations

  1. The differential equation.
  2. Order 1: the highest derivative present.
  3. Move everything in y to one side with dy and everything in x to the other, then integrate both sides.
  4. Characteristic equation of the homogeneous part (substitute y = e^{rx}).
  5. Its roots.
  6. General solution (C₁, C₂ … are arbitrary constants).
  7. Verified: substituting the solution back into the equation gives 0.

प्रश्नहरू मानिसहरूले सोध्छन्

What is a differential equation?

An equation whose unknown is a function, relating it to its own derivatives. "The rate of growth is proportional to the population" is y′ = ky, and solving it means finding y as a function of time.

Why does the solution have arbitrary constants?

Integrating loses information: many functions share the same derivative. An n-th order equation has n constants, fixed by n initial or boundary conditions.

यो पृष्ठको भागहरू यसबाट अनुकूलित गरिएको छ OpenStax Calculus Volume 2 (CC BY-NC-SA 4.0). यहाँको मुख्य पेशा कृषि र पशुपालन हो। यसको स्रोत गैर-व्यावसायिक प्रयोगका लागि लाइसेन्स गरिएको छ, यो पाठ निःशुल्क छ, केही पनि बिक्री गर्दैन, र उही लाइसेन्स अन्तर्गत बाँडिएको छ।

यसमा थप Differential Equations